Side Feed Machines

Model SP100Z SP350Z SP350 SP350S SP1200
Crimping range (mm) 1 10 — 46 10 — 54 10 — 54 10 — 54 10 — 54
Crimping range (inches) 1 0.39 — 1.81 0.39 — 2.12 0.39 — 2.12 0.39 — 2.12 0.39 — 2.12
Crimping force (kN) 100 350 350 350 1200
Crimping force (tonnage) 10 35 35 35 120
Crimpings / hour 2 520 11 480 11 480 11 950 11 420 11
Max. hose size (inches) 1 1¼ 1¼ 1¼ 1¼
Die set 3 kysymysmerkki
 SP100 CC22 CC22 CC22 CC22
Maximum opening (mm) 4 +11 / +62 12 +25 / +48 12 +25 / +48 12 +25 / +48 12 +25 / +63 12
Master die (D / L mm) 70 / 40 84 / 78 84 / 78 84 / 78 84 / 78
Master die (D / L inches) 2.75 / 1.58 3.31 / 3.07 3.31 / 3.07 3.31 / 3.07 3.31 / 3.07
Control kysymysmerkki UC UC UC UC UC
Motor (kW) 3 3 3 4 4
Motor (HP) 4.0 4.0 4.0 5.5 5.5
QC tool 14 kysymysmerkki — X X X X
Foot pedal 15 kysymysmerkki O O X X X
Control unit: integrated kysymysmerkki — — — — —
Control unit: C1 kysymysmerkki X — — — —
Control unit: C2 kysymysmerkki — X X X X
Back stop device: mechanic kysymysmerkki O O O O O
Back stop device: electric 15 kysymysmerkki O O O O O
Mirror kysymysmerkki — — — — —
UC1 O O O O O
UC2 O O O O O
UC3 O O O O O
Auto greasing G3 16 kysymysmerkki O O O O O
Remotic control unit kysymysmerkki O O O O O
Counter 18 X X X X X
ASCII signal O O O O O
Length (mm) 550 / 653 550 / 654 970 1505 970
Width (mm) 560 / 473 630 / 475 1020 1075 1020
Height (mm) 775 / 711 1012 / 632 2070 1871 2030
Length (inches) 22.1 / 25.7 21.7 / 25.8 38.2 59.3 38.2
Width (inches) 21.7 / 18.6 24.9 / 18.7 40.2 42.4 40.2
Height (inches) 30.5 / 28.0 39.9 / 24.9 81.5 73.7 80
Weight (kg) 186 / 96 410 / 100 930 1100 1350
Weight (lbs) 410 / 212 904 / 220 2050 2425 2976

 

X = standard
O = optional
— = not available

  1. With standard dies. Crimping range can be increased with special dies.
  2. Theoretical with ½ hose, diameter 10 mm.
  3. See table for die set data.
  4. Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
  5. 12V / 24V. Overload controlled.
  6. 1-phase / 3-phase.
  7. FP140 dies can be used without adapter dies.
  8. Hydraulic hose / industrial hose.
  9. With adapter dies.
  10. Hose cutter.
  11. Full cycle.
  12. Die travel / feeding channel.
  13. NC20, NC30 and NC40 dies can be used.
  14. Available for P20, P32 and CC22 dies.
  15. Not available in MS control.
  16. Technical implementation varies depending on the machine model. Please verify the suitability of the option from your distributor.
  17. Available in UC models only.
  18. Standard feature in UC models, includes ascending/descending counter.
701817 SP100 18315 CC22  
     
Mainostoimisto BSTR Luova Konttori Seinäjoki ja Vaasa