Finn-Power portable crimping machines are designed for field service when repairs must be made on-site. Finn-Power service machines are simple and straightforward in construction, easy to operate and highly reliable. The Finn-Power service line has selection of power packs from hand pump, air over hydraulic to battery operated solutions for finding the best fit to solve the service need. Finn-Power service line machines are also easy to carry to any location because of their light weight and portability.
| Model | P16HP | P16HPZ | P16AP | P16APZ | P20HP | P20AP | P20HPL | P20APL | P20CS | P32CS |
| Crimping range (mm) 1 | 10 — 45 | 10 — 45 | 10 — 45 | 10 — 45 | 10 — 61 | 10 — 61 | 11 — 61 | 11 — 61 | 10 — 61 | 10 — 87 |
| Crimping range (inches) 1 | 0.39 — 1.77 | 0.39 — 1.77 | 0.39 — 1.77 | 0.39 — 1.77 | 0.39 — 2.40 | 0.39 — 2.40 | 0.39 — 2.40 | 0.39 — 2.40 | 0.39 — 2.40 | 0.39 — 3.42 |
| Crimping force (kN) | 955 | 955 | 955 | 955 | 1370 | 1370 | 1370 | 1370 | 1370 | 2000 |
| Crimping force (tonnage) | 95 | 95 | 95 | 95 | 137 | 137 | 137 | 137 | 137 | 200 |
| Number of crimps / hour 2 | — | — | — | — | — | — | — | — | 250 | 150 |
| Max. hose size (inches) | 1 | 1 | 1 | 1 | 1½ | 1½ | 1½ | 1½ | 1½ | 2 |
| Die set 3 | P16 | P16 | P16 | P16 | P20 | P20 | P20 | P20 | P20 | P32 |
| Maximum opening (mm) 4 | +20 | +20 | +20 | +20 | +25 | +25 | +25 | +25 | +25 | +33 |
| Master die (D / L mm) | 39 / 64 | 39 / 64 | 39 / 64 | 39 / 64 | 84 / 80 | 84 / 80 | 84 / 80 | 84 / 80 | 84 / 80 | 99 / 80 |
| Master die (D / L inches) | 1.54 / 2.52 | 1.54 / 2.52 | 1.54 / 2.52 | 1.54 / 2.52 | 3.31 / 3.15 | 3.31 / 3.15 | 3.31 / 3.15 | 3.31 / 3.15 | 3.31 / 3.15 | 3.90 / 3.15 |
| Control | manual | manual | manual | manual | manual | manual | MS | MS | MS | MS |
| Motor (kW) | hand pump | air pressure | hand pump | air pressure | hand pump | air pressure | hand pump | air pressure | 1.6 / 2.2 5 | 1.6 / 2.2 5 |
| Motor (HP) | hand pump | air pressure | hand pump | air pressure | hand pump | air pressure | hand pump | air pressure | 2.1 / 3.0 5 | 2.1 / 3.0 5 |
| QC tool | — | — | — | — | O | O | O | O | O | O |
| Foot pedal | — | — | — | — | — | — | — | — | — | — |
| Backstop device: mechanic | — | — | — | O | O | O | O | O | O | O |
| Backstop device: electric | — | — | — | — | — | — | — | — | — | — |
| Mirror | — | — | — | — | — | — | — | — | — | — |
| UC1 | — | — | — | — | — | — | — | — | — | — |
| UC2 | — | — | — | — | — | — | — | — | — | — |
| UC3 | — | — | — | — | — | — | — | — | — | — |
| Auto greasing G3 | — | — | — | — | — | — | — | — | — | — |
| Remote control unit | — | — | — | — | — | — | — | — | — | — |
| Counter | — | — | — | — | — | — | — | — | — | — |
| A3 signal option | — | — | — | — | — | — | — | — | — | — |
| Length (mm) | 331 | 331 | 331 | 241 | 487 | 583 | 487 | 583 | 583 | 626 |
| Width (mm) | 401 | 197 / 105 | 346 | 197 / 155 | 441 | 477 | 441 | 447 | 533 | 543 |
| Height (mm) | 271 | 324 | 271 | 324 | 389 | 345 | 389 | 345 | 387 | 421 |
| Length (inches) | 13.1 | 13.1 | 13.1 | 9.5 | 19.2 | 22.9 | 19.2 | 22.9 | 22.9 | 24.7 |
| Width (inches) | 15.8 | 7.7 / 4.1 | 13.6 | 7.7 / 6.1 | 17.4 | 18.8 | 17.4 | 18.8 | 21 | 21.4 |
| Height (inches) | 10.7 | 12.7 | 15.4 | 12.7 | 15.4 | 13.6 | 15.4 | 13.6 | 15.2 | 16.6 |
| Weight (kg) | 26 | 28 | 28 | 26 | 66 | 59 | 66 | 59 | 83 | 116 |
| Weight (lbs) | 57 | 62 | 62 | 57 | 146 | 130 | 146 | 130 | 183 | 256 |
X = standard
O = optional
— = not available
- With standard dies. Crimping range can be increased with special dies.
- Theoretical with ½ hose, diameter 10 mm.
- See table for die set data.
- Maximum opening is the total die travel. Add this value to the minimum crimping diameter of the die set used. The result is the maximum opening of the machine with die set in place.
- 12V / 24V. Overload controlled.
- 1-phase / 3-phase.
- FP140 dies can be used without adapter dies.
- Hydraulic hose (2 spiral) / industrial hose.
- With adapter dies.
- Full cycle.
- NC20, NC30 and NC40 dies can be used.
- Die travel / feeding channel.
- Available for P20, P32 and CC22 dies.
- Not available in MS control.
- Technical implementation varies depending on the machine model. Please verify the suitability of the option from your distributor.
- Available in UC models only.
